Dell PowerEdge M I/O Aggregator Reference Manual page 157

Table 11-10. show vlan Command Information
Column Heading
Status
Q
Ports
Figure 11-31. show vlan id Command Example
Figure 11-32. show vlan brief Command Example
FTOS#show vlan brief
VLAN Name
---- -------------------------------- ----
1
2
20
1002
FTOS#
Figure 11-33. Using a VLAN Name Example
FTOSconf)#interface vlan 222
FTOS(conf-if-vl-222)#name test
FTOS(conf-if-vl-222)#do show vlan name test
Codes: * - Default VLAN, G - GVRP VLANs
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
NUM
222
FTOS(conf-if-vl-222)#
FTOS#
Related
interface vlan
Commands
Description
Displays the word
Active
Displays
for tagged interface,
Dot1x untagged, or
Displays the type, slot, and port information. For the type,
channel,
FTOS# show vlan id 40
Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring
VLANs, P - Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V
- VLT tagged
NUM Status Description
1 Inactive a
FTOS#
Status Description
Inactive
Configures a VLAN.
Inactive
for inactive VLANs and the word
for active VLANs.
G M
for GVRP tagged, for member of a VLAN-Stack VLAN,
U
(for untagged interface),
X
(capitalized X) for Dot1x tagged.
Fo
= fortygigabit ethernet, and
STG MAC Aging IP Address
--------- ------------------
0 0 unassigned
0 0 unassigned
0 0 unassigned
0 0 unassigned
Q Ports
U TenGig 1/22
x
(uncapitalized x) for
Po
= port
Te
= ten gigabit ethernet.
Q Ports
Interfaces | 155
T