Dell PowerEdge M I/O Aggregator Reference Manual page 116

Command
History
debug fip-snooping
Syntax
Parameters
Command Modes
Command
History
show fip-snooping config
Syntax
Command Mode
Command
History
Example
114 | FIP Snooping
Version 8.3.17.0 Supported on M I/O Aggregator
Enable the debug FIP protocol specific messages.
debug fip-snooping [all | acl | error | ifm | info | ipc | rx]
all
acl
error
ifm
info
ipc
rx
EXEC Privilege
Version 8.3.17.0 Supported on M I/O Aggregator
Displays the FIP snooping status and configured FC-MAP values.
show fip-snooping config
• EXEC
• EXEC Privilege
Version 8.3.17.0 Supported on M I/O Aggregator
Figure 9-1. show fip-snooping config Command Example
FTOS#show fip-snooping config
FIP Snooping Feature enabled Status: Enabled
FIP Snooping Global enabled Status: Enabled
Global FC-MAP Value: 0X0EFC00
FTOS#
Enable all the debug options.
Enable for ACL specific debugs
Enable for Error specific debugs
Enable for IFM specific debugs
Enable for Information specific debugs
Enable for IPC specific debugs
Enable for packet receive specific debugs