Undebug All - Dell PowerEdge M I/O Aggregator Reference Manual

Example
Related
Commands

undebug all

Syntax
Defaults
Command Modes
Command
History
write
Syntax
Parameters
Command Modes
76 | Control and Monitoring
Figure 5-33. traceroute (IPv4) Command Example
FTOS#traceroute www.force10networks.com
Translating "www.force10networks.com"...domain server (10.11.0.1) [OK]
Type Ctrl-C to abort.
---------------------------------------------------------------------------------
---------
Tracing the route to www.force10networks.com (10.11.84.18), 30 hops max, 40 byte
packets
---------------------------------------------------------------------------------
---------
TTL Hostname
1 10.11.199.190
2 gwegress-sjc-02.force10networks.com (10.11.30.126) 005.000 ms
001.000 ms
3 fw-sjc-01.force10networks.com (10.11.127.254) 000.000 ms 000.000 ms 000.000
ms
4 www.force10networks.com (10.11.84.18) 000.000 ms
FTOS#
ping Tests the connectivity to a device.
Disable all debug operations on the system.
undebug all
none
EXEC Privilege
Version 8.3.17.0 Supported on M I/O Aggregator
Copy the current configuration to either the startup-configuration file or the terminal.
write { memory | terminal }
memory
Enter the keyword
configuration file. This command is similar to the
command.
terminal
Enter the keyword
command is similar to the
EXEC Privilege
Probe1 Probe2
001.000 ms 001.000 ms
memory
to copy the current running configuration to the startup
terminal
to copy the current running configuration to the terminal. This
show running-config
Probe3
002.000 ms
001.000 ms
000.000 ms 000.000 ms
copy running-config startup-config
command.