Dell PowerEdge M I/O Aggregator Reference Manual page 107

Example Figure 7-11. show stack-unit stack-ports ets detail Command Example
FTOS#show stack-unit all stack-ports all ets details
Stack unit 1 stack port all
Max Supported TC Groups is 4
Number of Traffic Classes is 1
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
TC-grp
------------------------------------------------
0
1
2
3
4
5
6
7
8
FTOS#
show stack-unit stack-ports pfc detail
Displays the PFC configuration applied to ingress traffic on stacked ports, including PFC operational
mode on each unit with the configured priorities, link delay, and number of pause packets sent and
received.
Syntax show stack-unit {all | stack-unit} stack-ports {all | port-number} pfc detail
Parameters
stack-unit
port-number
Command Mode CONFIGURATION
Command
Version 8.3.17.0
History
Example Figure 7-12. show stack-unit all stack-ports all pfc details Command Example
FTOS#show stack-unit all stack-ports all pfc details
FTOS#
Priority#
0,1,2,3,4,5,6,7
Enter the stack unit.
Enter the port number.
Supported on M I/O Aggregator
stack unit 1 stack-port all
Admin mode is On
Admin is enabled
Local is enabled
Link Delay 45556 pause quantum
0 Pause Tx pkts, 0 Pause Rx pkts
Bandwidth TSA
100% ETS
- -
- -
- -
- -
- -
- -
- -
- -
Data Center Bridging | 105