Dell PowerEdge M I/O Aggregator Reference Manual page 172

Dell poweredge ftos command line reference guide for the m i/o aggregator
Hide thumbs Also See for PowerEdge M I/O Aggregator:
Table of Contents

Advertisement

Parameter
Command Modes
Command
History
Example
170
|
IPv4 Routing
interface
(OPTIONAL) Enter the following keywords and slot/port or number information:
For the Management interface, enter the keyword
followed by zero (0).
For a Port Channel interface, enter the keyword
number:
Range: 1 to 128
For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
For a VLAN, enter the keyword
brief
(OPTIONAL) Enter the keyword
whether an IP address is assigned.
configuration
(OPTIONAL) Enter the keyword
with non-default configurations only.
EXEC
EXEC Privilege
Version 8.3.17.0
Supported on M I/O Aggregator
Figure 12-9. show ip interface Command Example
FTOS#show ip int te 0/0
TenGigabitEthernet 0/0 is down, line protocol is down
Internet address is not set
IP MTU is 1500 bytes
Inbound
access list is not set
Proxy ARP is enabled
Split Horizon is enabled
Poison Reverse is disabled
ICMP redirects are not sent
ICMP unreachables are not sent
FTOS#
Table 12-5. show ip interface Command Example Items
Lines
TenGigabitEthernet 0/0...
Internet address...
IP MTU is...
Inbound access...
Proxy ARP...
Split horizon...
Poison Reverse...
ICMP redirects...
ICMP unreachables...
vlan
followed by a number from 1 to 4094.
brief
to view a brief summary of the interfaces and
configuration
Description
Displays the interface's type, slot/port and physical and line protocol
status.
States whether an IP address is assigned to the interface. If one is, that
address is displayed.
Displays IP MTU value.
Displays the name of the any configured incoming access list. If none is
configured, the phrase "not set" is displayed.
States whether proxy ARP is enabled on the interface.
States whether split horizon for RIP is enabled on the interface.
States whether poison for RIP is enabled on the interface
States if ICMP redirects are sent.
States if ICMP unreachable messages are sent.
ManagementEthernet
port-channel
followed by a
TenGigabitEthernet
to display the physical interfaces

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge web serverPoweredge xl 5133-4

Table of Contents