Logging Facility - Dell PowerEdge M I/O Aggregator Reference Manual

Related
Commands

logging facility

Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands
212 | Simple Network Management Protocol (SNMP) and Syslog
clear logging
logging hostname
show logging
Configure the Syslog facility, used for error messages sent to Syslog servers.
logging facility [ facility-type ]
To return to the default values, use the no logging facility command.
facility-type
local7
CONFIGURATION
Version 8.3.17.0 Supported on M I/O Aggregator
logging Enables logging to a Syslog server.
hostname
logging on Enables logging.
Clears the logging buffer.
Returns the logging console parameters to the default setting.
Displays the logging settings and system messages in the internal buffer.
(OPTIONAL) Enter one of the following parameters.
• auth (authorization system)
• cron (Cron/at facility)
• deamon (system deamons)
• kern (kernel)
• local0 (local use)
• local1 (local use)
• local2 (local use)
• local3 (local use)
• local4 (local use)
• local5 (local use)
• local6 (local use)
• local7 (local use)
• lpr (line printer system)
• mail (mail system)
• news (USENET news)
• sys9 (system use)
• sys10 (system use)
• sys11 (system use)
• sys12 (system use)
• sys13 (system use)
• sys14 (system use)
• syslog (Syslog process)
• user (user process)
• uucp (Unix to Unix copy process)
The default is local7.