Dell PowerEdge M I/O Aggregator Reference Manual page 236

clock summer-time recurring
Syntax
Parameters
Defaults
Command Modes
Command
History
234 | System Time
clock summer-time recurring
show clock
Set the software clock to convert to daylight saving time on a specific day each year.
clock summer-time time-zone recurring
end-day end-month end-time
To delete a daylight saving time zone configuration, use the
time-zone
Enter the three-letter name for the time zone. This name is displayed in the
output.
You can enter up to eight characters.
start-week (OPTIONAL) Enter one of the following as the week that daylight saving begins and then
enter values for
week-number:
•
start daylight saving time.
• first:
last:
•
start-day
Enter the name of the day that you want daylight saving time to begin. Use English three
letter abbreviations, for example, Sun, Sat, Mon, etc.
Range: Sun – Sat
start-month
Enter the name of one of the 12 months in English.
start-time
Enter the time in hours:minutes. For the hour variable, use the 24-hour format, example,
17:15 is 5:15 pm.
end-week Enter the one of the following as the week that daylight saving ends:
week-number:
•
saving time.
first:
•
month.
last:
•
end-day Enter the weekday name that you want daylight saving time to end. Enter the weekdays
using the three letter abbreviations, for example Sun, Sat, Mon etc.
Range: Sun to Sat
end-month
Enter the name of one of the 12 months in English.
end-time Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format,
example, 17:15:00 is 5:15 pm.
offset (OPTIONAL) Enter the number of minutes to add during the summer-time period.
Range: 1 to 1440.
Default: 60 minutes.
Not configured.
CONFIGURATION
Version 8.3.17.0 Supported on M I/O Aggregator
Sets a date (and time zone) on which to convert the switch to daylight saving
time each year.
Displays the current clock settings.
[ start-week start-day start-month start-time end-week
[ offset ]]
start-day end-time
through
Enter a number from 1-4 as the number of the week in the month to
Enter this keyword to start daylight saving time in the first week of the month.
Enter this keyword to start daylight saving time in the last week of the month.
enter a number from 1-4 as the number of the week to end daylight
enter the keyword first to end daylight saving time in the first week of the
enter the keyword last to end daylight saving time in the last week of the month.
no clock summer-time command.
:
show clock