Show Vlan - Dell PowerEdge M I/O Aggregator Reference Manual

Related
Commands

show vlan

Syntax
Parameters
Command Modes
Command
History
Example
154 | Interfaces
vlan tagged
the current VLAN configurations on the switch.
Displays
show vlan [ brief | id vlan-id | name vlan-name ]
brief
(OPTIONAL) Enter the keyword
• VLAN ID
• VLAN name (left blank if none is configured.)
• Spanning Tree Group ID
• MAC address aging time
• IP address
id vlan-id
(OPTIONAL) Enter the keyword
information on the VLAN specified is displayed.
name
(OPTIONAL) Enter the keyword
vlan-name Only information on the VLAN named is displayed.
EXEC
EXEC Privilege
Version 8.3.17.0 Supported on M I/O Aggregator
Figure 11-30. show vlan Command Example
FTOS#show vlan
Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring VLANs, P -
Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged
NUM Status
1 Inactive
2 Inactive
* 20 Active
1002 Active
FTOS#
Table 11-10. show vlan Command Information
Column Heading
(Column 1 — no heading)
NUM
Runs the TDR test.
brief
id
followed by a number from 1 to 4094. Only
name
Description
a
Description
asterisk symbol (*) = Default VLAN
G
= GVRP VLAN
P
= primary VLAN
C
= community VLAN
I
= isolated VLAN
Displays existing VLAN IDs.
to display the following information:
followed by the name configured for the VLAN.
Q Ports
U Te 0/3,5,13,53-56
T Te 0/3,13,55-56