Dell PowerEdge M I/O Aggregator Reference Manual page 31

Command
Version 8.3.17.1
History
Usage Restoring factory defaults deletes the existing startup configuration and all persistent settings
Information
(stacking, fanout, etc.).
When restoring all units in a stack, all the units in the stack are placed into stand-alone mode.
When restoring a single unit in a stack, that unit placed in stand-alone mode. No other units in the stack
are affected.
When restoring units in stand-alone mode, the units remin in stand-aline mode after the restoration.
After the restore is complete, the units power cycle immediately.
Caution:
Example Figure 4-5. restore factory-defaults (all units in a stack) Command Example
FTOS#restore factory-defaults stack-unit all clear-all
***********************************************************************
*
*
*
*
*
***********************************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit
------------------------
0
1
2
3
4
5
Power-cycling the unit(s).
FTOS#
Figure 4-6. restore factory-defaults (single unit in a stack) Command Example
FTOS#restore factory-defaults stack-unit 0 clear-all
***********************************************************************
*
*
*
*
***********************************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit
------------------------
0
Power-cycling the unit(s).
FTOS#
Supported on M I/O Aggregator
There is no undo for this command.
Warning - Restoring factory defaults will delete the existing
startup-config and all persistent settings (stacking, fanout, etc.)*
All the units in the stack will be split into standalone units.
After restoration the unit(s) will be powercycled immediately.
Proceed with caution !
Nvram Config
Success Success
Success Success
Success Success
Not present
Not present
Not present
Warning - Restoring factory defaults will delete the existing
startup-config and all persistent settings (stacking, fanout, etc.)*
After restoration the unit(s) will be powercycled immediately.
Proceed with caution !
Nvram Config
Success Success
*
*
*
*
*
*
*
File Management | 29