Dell PowerEdge M I/O Aggregator Reference Manual page 243
Dell poweredge ftos command line reference guide for the m i/o aggregator
Hide thumbs
Also See for PowerEdge M I/O Aggregator:
- Getting started manual (38 pages) ,
- Command reference manual (290 pages)
Table of Contents
Advertisement
show running-config uplink-state-group
Displays the current configuration of one or more uplink-state groups.
Syntax
show running-config uplink-state-group [group-id]
Parameters
group-id
Defaults
none
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.17.0
History
Example
Figure 24-1. show running-config uplink-state-group Command Example
FTOS#show running-config uplink-state-group
!
uplink-state-group 1
FTOS#
Related
show uplink-state-group
Commands
Supported on M I/O Aggregator
downstream TenGigabitEthernet 0/1-32
downstream TenGigabitEthernet 1/1-32
upstream Port-channel 128
defer-timer 10
Displays the current configuration of all uplink-state groups or a specified
group. Valid group-id values are 1 to 16.
Displays status information on a specified uplink-state group or all groups.
Uplink Failure Detection (UFD) | 241
Advertisement
Table of Contents
