Dell PowerEdge M I/O Aggregator Reference Manual page 44

disable
Syntax
Parameters
Defaults
Command Modes
Command
History
enable
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
end
Syntax
42 | Control and Monitoring
Return to EXEC mode.
disable [ level ]
level (OPTIONAL) Enter a number for a privilege level of the FTOS.
Range: 0 to 15.
Default: 1
1
EXEC Privilege
Version 8.3.17.0 Supported on M I/O Aggregator
Enter the EXEC Privilege mode or any other privilege level configured. After entering this command,
you may need to enter a password.
enable [ level ]
level
(OPTIONAL) Enter a number for a privilege level of FTOS.
Range: 0 to 15.
Default: 15
15
EXEC
Version 8.3.17.0 Supported on M I/O Aggregator
Users entering EXEC Privilege mode or any other configured privilege level can access configuration
commands. To protect against unauthorized access, use the
password for the enable command at a specific privilege level. If no privilege level is specified, the
default is privilege level 15.
enable password
Configures a password for the
Return to the EXEC Privilege mode from other command modes (for example, CONFIGURATION
mode).
end
command to configure a
enable password
enable
command and to access a privilege level.