Show Ip Igmp Groups - Dell PowerEdge M I/O Aggregator Reference Manual

show ip igmp groups

View the IGMP groups.
Syntax
show ip igmp groups [group-address [detail] | detail | interface [group-address [detail]]]
Parameters
group-address
interface
detail
Command Modes EXEC
EXEC Privilege
Command
Version 8.3.17.0
History
Example Figure 10-1. show ip igmp snooping mrouter Command Example
FTOS#show ip igmp groups
Total Number of Groups: 5
IGMP Connected Group Membership
Group Address
Expires
225.0.0.0
00:02:04
225.0.0.1
00:02:04
225.0.0.2
00:02:04
225.0.0.3
00:02:04
225.0.0.4
00:02:04
Field
Group Address
Interface
Mode
Uptime
Expires
Last Reporter
Member Ports
(OPTIONAL) Enter the group address in dotted decimal format to view information on
that group only.
(OPTIONAL) Enter the interface type and slot/port information:
For a VLAN interface enter the keyword vlan followed by a number from 1 to 4094.
(OPTIONAL) Enter the keyword
information.
Supported on M I/O Aggregator
Interface
Last Reporter
Vlan 100
3.0.0.51
Member Ports: Po 2
Vlan 100
3.0.0.51
Member Ports: Po 2
Vlan 100
3.0.0.51
Member Ports: Po 2
Vlan 100
3.0.0.51
Member Ports: Po 2
Vlan 100
3.0.0.51
Member Ports: Po 2
Table 10-1.
show ip igmp groups
to display the IGMPv3 source
detail
Mode
IGMPv2
IGMPv2
IGMPv2
IGMPv2
IGMPv2
Command Example Fields
Description
Lists the multicast address for the IGMP group.
Lists the interface type, slot and port number.
Displays the IGMP version used.
Displays the amount of time the group has been operational.
Displays the amount of time until the entry expires.
Displays the IP address of the last host to be a member of the
IGMP group.
Indicates the member ports of the port channel. If the port channel
is VLT, an asterisk (*) after the port channel number indicates the
port channel is locally down and that a remote VLT port is up.
Internet Group Management Protocol (IGMP) | 123
Uptime
00:00:05
00:00:05
00:00:05
00:00:05
00:00:05