Installing Vls6100, Vls6200, Vls6500, And Vls6600 Cables; Vls6100 And Vls6500 - Connecting San And Lan Cabling To The Node; Vls6200 - Connecting San And Lan Cabling To The Node - HP StorageWorks 6000 - Virtual Library System User Manual

Installing VLS6100, VLS6200, VLS6500, and VLS6600 Cables

1. Connect Fibre Channel cables from your SAN media server or from your physical tape libraries
(for automigration) to the node Fibre Channel host ports, starting with Fibre Channel host port 0
and working towards Fibre Channel host port 3
NOTE:
For Automigration, you will be asked to select the number of Fibre Channel ports to reserve
for Automigration. The software will then reserve that number of ports, beginning with port
3, then port 2, etc. so that the left-most ports as you face the back of the library are used
to connect to physical libraries, either directly or through an Fibre Channel switch.
a. VLS6100 and VLS6500
Figure 28 VLS6100 and VLS6500 — Connecting SAN and LAN cabling to the node
.
Item
1
2
3
4
5
b. VLS6200
Figure 29 VLS6200 — Connecting SAN and LAN cabling to the node
.
54 Hardware Installation
Description
FC host port 0
FC host port 1
FC host port 2
FC host port 3
10/100/1000 NIC 1 connector
(Figure 28, Figure 29, and Figure 30).