4.
Remove the processor memory board.
Figure 131 Removing a processor memory board
.
To replace the component:
1.
Install the processor memory board.
2.
Re-install the node access panel. See
3.
Press the rail-release levers at the front of both node rails and slide the node into the rack.
4.
Secure the node in the rack by tightening the thumbscrews.
5.
Power on the node. See
Processor Power Module
1.
Remove the processor memory board. See
292
Component Replacement
Installing the VLS6800 Node Access
Powering on the VLS6000 series
Processor Memory
Panel.
System.
Board.