HP StorageWorks 6000 - Virtual Library System User Manual page 96

Status message
Up To Date
Waiting for Backup Data
In Use
Backup Postprocessing
Out of Sync
Mirror Scheduled
Mirroring
Mirror Broken
Restoring
Eject Pending
Mirror/Eject Pending
Mirroring before Eject
Export Preprocessing*
Exporting*
Partially Exported*
Export In Use*
In Transit/Importing*
Importing/In Use*
Importing/Backup Postpro-
cessing*
96 Automigration/Replication
Pool type Description
Echo Copy The target and source cartridges have the same contents.
Waiting for the backup application to update the source cartridge
by appending or overwriting the cartridge over the SAN. A
cartridge will get into this state when the barcode for the source
Echo Copy cartridge already existed on the source VLS when the (LBR) Echo
Copy pool was created and the source cartridge contained data.
It is not possible to replicate that preexisting content in a deduplic-
ated manner.
The cartridge has been loaded into a drive by the backup applic-
Echo Copy
ation.
Echo Copy Creating deduplication instructions.
The source virtual cartridge has been updated by the backup
Echo Copy application since the target cartridge was updated. Instruction
creation is complete.
Waiting to acquire resources to run the job to synchronize the
Echo Copy
target cartridge with the source cartridge.
Echo Copy Mirroring from the target cartridge to the source cartridge.
Echo Copy A problem was encountered mirroring the cartridge.
Echo Copy Mirroring from the source cartridge to the target cartridge.
Ejecting the target cartridge and about to put the source cartridge
Echo Copy
into the firesafe.
About to eject the target cartridge and then put the source cart-
Echo Copy
ridge into the firesafe.
Synchronizing the cartridge in the Destination Library with the
source virtual cartridge. When the mirror job is complete, the
Echo Copy
target cartridge will be ejected and the source cartridge will be
moved to the firesafe.
Gathering deduplication instructions needed for replication using
Echo Copy
tape transport.
Echo Copy Copying content from the source cartridge onto a physical tape.
Copying content from the source cartridge will continue on another
Echo Copy
physical tape.
Waiting for the remaining cartridges in the pool to finish export-
Echo Copy
ing.
Importing status on the destination library, In Sync status on the
Echo Copy
source VLS.
Importing status on the destination library, loaded into a drive by
Echo Copy
the backup application the source VLS.
Importing status on the destination library, creating deduplication
Echo Copy
instructions on the source VLS.