Quickfind Diagnostic Display Leds - HP StorageWorks 6000 - Virtual Library System User Manual

QuickFind Diagnostic Display LEDs

The QuickFind Diagnostic Display is located on the top of the access panel and displays the node
internal component and temperature status.
Item Description
1 Fan
2 Processor
Processor memory
3
board
Processor power
4
module
Status Action
Off = Normal
Be sure fan is installed and seated properly.
On = Attention
If fan is installed and seated properly, replace the fan.
required
Off = Normal
Processor pre-failure notification. Inspect the IML logs
and POST messages.
On = Attention
required
Processor might need to be replaced.
Off = Normal
Processor memory board power failure.
On = Attention
If problem persists, replace the processor or processor
required
memory board.
Off = Normal
PPM power failure. If problem persists, replace PPM.
On = Attention
If the PPM and the BRD LEDs are both on, there is a
required
configuration error.
HP StorageWorks 249