Removing A Node Power Supply; Installing A Node Power Supply - HP StorageWorks 6000 - Virtual Library System User Manual

2. Press the power supply release lever (1), and then pull the power supply from the node.
Figure 111 Removing a node power supply
.
To replace the component:
WARNING!
To reduce the risk of electric shock or damage to the equipment, do not connect the power cord to
the power supply until the power supply is installed.
1. Remove the protective cover from the connector pins on the power supply.
2. Slide the power supply into the bay until it clicks.
Figure 112 Installing a node power supply
.
276 Component Replacement