Command
addEmail
getEmail
deleteEmail
addSnmpServer
getSnmp
deleteSnmpServer
1
<s> = string; <n> = number; <f> = filename
214
CLI Command Set
1
Usage
Adds an E-mail address and desired report formatting to the E-mail notification
alert settings. Where the options are:
-a <s> - E-mail address (required)
-c <s> - VLS IP address (required)
-s <n> - Severity (1-Error, 2-Warning, 4-Info, or 8-Unknown) (optional)
-y <n> - E-mail type (1-Long with attachment, 2-Long, 4-Short, or 8-Reports)
(optional)
-h - Displays command usage information (optional)
-f <n> - Notification frequency (0-None, 1-Daily, 2-Weekly, 3-Bi-weekly, or
4-Monthly) (optional)
Returns the report settings for each E-mail address configured for notification alerts.
Deletes the specified E-mail address from the E-mail notification alert settings.
Where the options are:
-a <s> - E-mail address (required)
-c <s> - VLS node IP address (required)
-f - Force. This parameter is ignored and is present only for backward compatibility
(optional)
-y <n> - Email type (1-long with attachment, 2-long, 4-short, 8-reports,
16-configuration) (required)
-h - Displays command usage information (optional)
Specifies an SNMP management console to receive SNMP traps from the VLS.
Where the options are:
-a <s> - SNMP server IP address (required)
-c <s> - VLS node IP address (required)
-m <s> - Community (Public, ...) (required)
-v <s> - Trap version (required)
-s <n> - Severity (1-Error, 2-Warning, 4-Info, or 8-Unknown) (required)
-h - Displays command usage information (optional)
Returns the SNMP management console configuration settings for notification
alerts.
Deletes the specified SNMP management console from the SNMP notification alert
settings. Where the options are:
-a <s> - SNMP server IP address (required)
-c <s> - VLS node IP address (required)
-f - Force. This parameter is ignored and is present only for backward compatibility
(optional)
-h - Displays command usage information (optional)