Removing The Dvd-Cd Drive; Installing The Dvd-Cd Drive - HP StorageWorks 6000 - Virtual Library System User Manual

1. Power off the node.
NOTE:
The ejector button for the CD-ROM drive is recessed to prevent accidental ejection; it may
be helpful to use a small, flat, blunt object, such as a key or pen, to push the ejector button.
2. Press the ejector button in firmly until the DVD-CD drive ejects (1).
Figure 120 Removing the DVD-CD drive
.
3. Pull the DVD-CD drive out of the node.
To replace the component:
1. Carefully align the connector on the rear of the drive with the connector on the DVD-CD drive
interface board.
2. Slide the drive into the bay until it clicks.
Figure 121 Installing the DVD-CD drive
.
282 Component Replacement