HP StorageWorks 6000 - Virtual Library System User Manual page 209

Command
removeCartridge
getStorageCapacity
getStorageCapacit-
ies
getStorageLuns
getStorageLunsByAr-
ray
getStorageLunsBySP
getStorageLunsByN-
ode
createStoragePool
deleteStoragePool
deleteAllStorage-
Pools
getStoragePoolNames
1
Usage
Deletes the specified cartridge and its user data from the VLS. Where the options
are:
-a <s> - VLS filename of cartridge to delete (required)
-b <s> - Barcode value of cartridge to delete (required)
-c <n> - Capacity of cartridge to delete in gigabytes (required)
-f - Force. This parameter is ignored and is present only for backward compatibility
(optional)
-l <s> - Name of library with which cartridge is associated (Library_0, ...)
(required)
-s <s> - Storage LUN name (SLun_#) (optional)
-h - Displays command usage information (optional)
Returns the total usable storage capacity of the storage pool. Where the options
are:
-a <s> - Storage pool name (StoragePool_#) (optional)
-h - Displays command usage information (optional)
Returns a list of the usable storage capacity of each storage pool on the VLS.
Returns a list of the storage LUNs on the VLS. List includes the storage LUN name,
IP address, storage pool number, number in storage pool, and so on for each
LUN.
Returns a list of the storage LUNs in the disk array. Where the options are:
-a <s> - Disk array IP address (required)
-h - Displays command usage information (optional)
Returns a list of the storage LUNs on the storage pool. Where the options are:
-a <s> - Storage pool name (StoragePool_#) (optional)
-h - Displays command usage information (optional)
Returns a list of the storage LUNs on the node. Where the options are:
-a <n> - Node ID (0, 1, 2, ... - default is 0)) (optional)
-h - Displays command usage information (optional)
Creates a new storage pool. Where the options are:
-n <n> - maximum number of cartridges (1 to 8000) (optional)
-h - Displays command usage information (optional)
Deletes a storage pool. Where the options are:
-a <s> - Storage pool name (StoragePool_#) (required)
-h - Displays command usage information (optional)
Deletes all storage pools on the VLS and all the LUNs in all storage pools.
Returns a list of the storage pool names on the VLS.
HP StorageWorks 209