Restarting Command View Vls - HP StorageWorks 6000 - Virtual Library System User Manual

1. Select Continue to this website (not recommended). A pink Certificate Error appears to the right
of the URL. (Your browser window may look slightly different from the images below.)
2. Select the Certificate Error. An Untrusted Certificate window opens.
3. Select View certificates. A Certificate window opens.
4. Select Install Certificate... to launch the Certificate Wizard.
5. Select Next.
6. Make sure that Automatically select the certificate store based on the type of certificate (the default)
is chosen and select Next.
7. Select Finish.
8. A Security Window opens. Select Yes.
9. Select OK or Finish on each window that displays until the Command View VLS login window
displays.
10.

Restarting Command View VLS

To restart Command View VLS:
1. Under the System tab, select Chassis in the navigation tree.
2. Under Maintenance Tasks, select System Maintenance.
3. Click Restart Command View VLS in the task bar.
The Restart Command View VLS window opens.
HP StorageWorks 137