Install Appliance In The Rack; Installing The Vls6800 Node Into A Rack; Attaching Rails To The Vls6600 Node - HP StorageWorks 6000 - Virtual Library System User Manual

1. Align one of the rails with the left side of the node (as you face the front of the node) so that the
word "FRONT" on the rail is seen right-side-up and at the front of the node.
Figure 8 Attaching rails to the VLS6600 node
.
2. Align the holes in the rail with the round tabs on the side of the node.
3. Put the rail onto the node with the tabs extending into the holes on the side of the rail, then slide
the rail toward the front of the node until the tabs are locked into the rail.
4. On the other side of the node, align the remaining rail so that the word "FRONT" on the rail is
seen at the front of the node. It will be printed upside-down.
5. Align the holes in the rail with the round tabs on the side of the node.
6. Put the rail onto the node with the tabs extending into the holes on the side of the rail, then slide
the rail toward the front of the node until the tabs are locked into the rail.

Install Appliance in the Rack

To install the appliance into the rack:
1. Align the rails on the appliance with the rails in the rack.
2. Slide the appliance fully into the rack.
The rails on the appliance will lock into the rails on the rack. When fully seated against the rack,
the appliance will also lock into place.

Installing the VLS6800 Node into a Rack

Follow the steps in this section if you are installing the VLS6800 node into a rack with square holes.
If you are installing the node into a rack with round holes, order the appropriate rack installation
option kit, and then refer to the installation instructions that ship with the option kit for more information.
If you are installing the VLS6800 node into a telco rack, order the appropriate option kit at the
RackSolutions.com web site (http://www.racksolutions.com/hp). Follow the node-specific instructions
on the web site to install the rack brackets. After installing the brackets, follow the steps in this section.
WARNING!
When installing the node in a telco rack, be sure that the rack frame is adequately secured to the top
and bottom of the building structure.
HP StorageWorks 39