Installing The Vls6600 Node Into A Rack - HP StorageWorks 6000 - Virtual Library System User Manual

1. Locate the rail kit — part number 360332 003.
Install the two outer slide rails to the rack. The outer rails are marked "FRONT" and "REAR."
On both sides of the rack, align the rail holes with the holes in the rack and secure.
2. Attach the inner rails to the sides of the node.
Align the holes in the rail with the round tabs on the side of the node.
NOTE:
The inner rails are identical.
The word "FRONT" should face away from the node, but will appear updside-down on one
side.
3. Align the rails on the node with the rails in the rack, and slide the node fully into the rack.
4. Tighten the thumbscrews.

Installing the VLS6600 Node into a Rack

NOTE:
If you are installing the node into a telco rack, order the appropriate option kit at the RackSolutions.com
web site: http://www.racksolutions.com/hp. Follow the instructions on the web site to install the rack
brackets.
HP StorageWorks 37