WARNING!
Do not use the handles on the disk array power supply units to lift or hold the disk array. These handles
are designed only for holding the power supply units or removing them from the disk array, not for
supporting the weight of the disk array.
Rack Mounting Requirements
Each disk array requires a vertical rack space of 2U (equivalent to 89 mm, or 3.5 inches).
HP recommends that you mount the disk arrays in the order shown in
and VLS6800 disk array rack mounting
Figure 18 VLS6100, VLS6200, and VLS6500 disk array rack mounting order
.
Item
Description
1
Disk array 3
2
Disk array 2
3
Node
4
Disk array 0
5
Disk array 1
46
Hardware Installation
order, depending on model.
Figure
18,
Figure
19, or
VLS6600