Dimm; Removing The Processor Zone Fan Module; Removing The Node Dimm - HP StorageWorks 6000 - Virtual Library System User Manual

5. Slide the component out the front of the node.
Figure 104 Removing the processor zone fan module
.
To replace the component, reverse the removal procedure.

DIMM

1. Power off the node. See
2. Extend or remove the node from the rack. See
3. Remove the access panel. See
4. Open the DIMM slot latches (1).
5. Remove the DIMM.
Figure 105 Removing the node DIMM
.
CAUTION:
Use only Compaq branded or HP DIMMs. DIMMs from other sources may adversely affect data
integrity.
To replace the component, reverse the removal procedure.
272 Component Replacement
Powering Off the System.
Extending the Node from the
Removing the VLS Node Access
Rack.
Panel.