Engaging The Rack Rail With The Marked Hole In The Front Of The Rack; Engaging The Rack Rail With The Marked Hole In The Rear Of The Rack - HP StorageWorks 6000 - Virtual Library System User Manual

4. Slide the front end of the right rack rail toward the inside front of the rack until the locking latch
engages with the marked hole in the front rack upright.
Figure 22 Engaging the rack rail with the marked hole in the front of the rack
.
5. Extend the back end of the rail toward the inside rear of the rack until the locking latch engages
with the marked hole in the rear rack upright.
Figure 23 Engaging the rack rail with the marked hole in the rear of the rack
.
HP StorageWorks 51