Fbdimm; Removing The Node Fan Module 2 Or 3 - HP StorageWorks 6000 - Virtual Library System User Manual

5. To remove fan module 2 or 3:
a. Remove the power supply air baffle. See
b. Remove fan module 2 or 3.
Figure 116 Removing the node fan module 2 or 3
.
To replace the component, reverse the removal procedure.
IMPORTANT:
After installing the fan module, firmly press the top of the module connectors to ensure the connectors
are seated properly.

FBDIMM

1. Power off the node.
2. Extend or remove the node from the rack. See
the Node from the
3. Remove the access panel.
4. Open the FBDIMM slot latches.
5. Remove the FBDIMM.
CAUTION:
Use only Compaq branded or HP FBDIMMs. FBDIMMs from other sources may adversely affect data
integrity.
To replace the component, reverse the removal procedure.
Rack.
Figure 114.
Extending the Node from the Rack or Removing
HP StorageWorks 279