Hp Systems Insight Display And Leds - HP StorageWorks 6000 - Virtual Library System User Manual

Item Description
3 External health LED (power supply)
4 NIC 1 link/activity LED
5 NIC 2 link/activity LED
Power On/Standby button and system power
6
LED

HP Systems Insight Display and LEDs

234 Component Identification
Status
Green = Power supply health is normal.
Amber = Power redundancy failure. To identify
the component in a degraded state, refer to
Systems Insight Display LEDs and Internal Health
LED Combinations.
Red = Critical power supply failure. To identify
the component in a critical state, refer to
Systems Insight Display LEDs and Internal Health
LED Combinations.
Green = Network link exists.
Flashing green = Network link and activity exist.
Off = No link to network exists.
If power is off, the front panel LED is not active.
View the LEDs on the RJ-45 connector for status
by referring to Rear Panel LEDs and
Green = Network link exists.
Flashing green = Network link and activity exist.
Off = No link to network exists.
If power is off, the front panel LED is not active.
View the LEDs on the RJ-45 connector for status
by referring to Rear Panel LEDs and
Green = System is on.
Amber = System is shut down, but power is still
applied.
Off = Power cord is not attached, power supply
failure has occurred, no power supplies are
installed, or facility power is not available.
HP
HP
Buttons.
Buttons.