Installing The Disk Arrays Into A Rack; Sliding The Node To The Rear Of The Rack; Tightening The Thumbscrews - HP StorageWorks 6000 - Virtual Library System User Manual

7. Reach around the front of the node to press the rail-release levers at the front of both node rails,
and continue to slide the node into the rack.
Figure 16 Sliding the node to the rear of the rack
.
8. Tighten the thumbscrews to secure the node to the rack.
Figure 17 Tightening the thumbscrews
.
9. Reinstall the power supplies.

Installing the Disk Arrays into a Rack

This section describes how to install the MSA20 disk array.
HP StorageWorks 45