HP StorageWorks 6000 - Virtual Library System User Manual page 213

Hp storageworks 6000-series virtual library system user guide (ah809-96038, march 2010)
Hide thumbs Also See for StorageWorks 6000 - Virtual Library System:
Table of Contents

Advertisement

Command
getArrayFault
getFreeArrayList
getFreeStorageLuns
getNotifica-
tionsCount
getNotifica-
tionsDate
deleteNotifications
addEmailServer
getEmailServer
deleteEmailServer
1
Usage
Returns the current health status for the specified array (0 = healthy 1 = degraded
2 = critical 3 = failed 4 = missing). Where the options are:
-a <s> - IP address of the desired array (required)
-h - Displays command usage information (optional)
Returns a list of arrays not yet configured into a storage pool. This command reports
"No disk arrays found" if all arrays have been added to a storage pool.
Returns the list of LUNs that are not part of any storage pool.
Returns the number of notification messages specified counting back from the most
recent. Where the options are:
-n <n> - Maximum number of notifications to return (required)
-h - Displays command usage information (optional)
Returns all the notification alert messages that occurred starting with the specified
date. Where the options are:
-d - mm/dd/yy on or after this date (required)
-h - Displays command usage information (optional)
Deletes the specified notification alerts from the VLS. Where the options are:
-id <s> - ID number of notification to delete (required)
-h - Displays command usage information (optional)
Specifies an E-mail server with an SMTP gateway to route notification alerts from
the VLS. Where the options are:
-a <s> - E-mail server address (required)
-c <s> - node IP address (required)
-s <s> - Sender email address (optional)
-h - Displays command usage information (optional)
Returns the E-mail server configuration settings for notification alerts.
Deletes the specified E-mail server from the E-mail notification alerts settings. Where
the options are:
-a <s> - E-mail server address (required)
-c <s> - VLS node IP address (required)
-f - Force - This parameter is ignored and is present only for backward
compatibility (optional)
-h - Displays command usage information (optional)
HP StorageWorks
213

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks 6000 series

Table of Contents