Removing A Vls6100, Vls6200, Or Vls6500 Node From The Rack; Sliding The Node Into The Rack; Tightening The Thumbscrews - HP StorageWorks 6000 - Virtual Library System User Manual

3. After performing the replacement procedure, slide the node back into the rack:
a. Reach around the front of the node to press the rail-release levers at the front of both node
rails and slide the node into the rack.
Figure 95 Sliding the node into the rack
.
b. Tighten the thumbscrews to secure the node to the rack.
Figure 96 Tightening the thumbscrews
.

Removing a VLS6100, VLS6200, or VLS6500 Node from the Rack

To remove the node from a rack:
1. Power off the node. See
2. Extend the node from the rack. See
3. Disconnect the cabling and remove the node from the rack. For more information, refer to the
documentation that ships with the rack mounting option.
Powering Off the System.
Extending the Node from the Rack.
HP StorageWorks 263