HP StorageWorks 6000 - Virtual Library System User Manual page 204

Hp storageworks 6000-series virtual library system user guide (ah809-96038, march 2010)
Hide thumbs Also See for StorageWorks 6000 - Virtual Library System:
Table of Contents

Advertisement

Edit the Fibre Channel host port settings
Enable oversubscription and view oversubscription settings
View LUN mapping
Create, view, and destroy virtual libraries, tape drives, or cartridges
Add, view, or remove barcode templates
Table 9 CLI configuration commands
Command
addNode
discoverArray
updateFC
setOverSubscription
getOverSubscription
getLibTypes
204
CLI Command Set
1
Usage
Add a node to the VLS. See getNodeNames.
Discovers any new arrays added to the VLS.
Changes the default FC host port connection settings. Where the options are:
-a <n> - ID number of node to modify (0, ...) (optional)
-i <n> - FC index (0, 1, ...) (required)
-l <n> - If attached in arbitrated loop mode, specifies a hard ALPA value between
0 and 125. A value of -1 specifies a dynamically assigned ALPA. If not attached
to an arbitrated loop, this parameter is ignored (required)
-r <n> - Port number of the FC port to modify (required)
-s <n> - Preferred speed (0-Auto, 1-One GB, 2-Two GB, 4-Four GB, or 10-Ten
GB) (required)
-t <n> - Preferred topology (0-Auto, 1-Point to Point, 2-Loop, 3-Fabric, or 4-Public
Loop) (required)
-h - Displays command usage information (optional)
Enables or disables oversubscription and specifies the percent storage remaining
for notification. Where the options are:
-e <n> - Enable/disable oversubscription (0-Disabled or 1-Enabled) (required)
-p <n> - Percentage of capacity remaining for alert notification (required)
-h - Displays command usage information (optional)
Returns whether the oversubscription feature is enabled or disabled and the capa-
city remaining percentage for notification alert. Oversubscription is enabled when
enabled = 0. Oversubscription is disabled when enabled = 1.
Returns a list of available library emulation types. Displays each library emulation's
name, type, product, revision, and vendor information. Where the options are:
-l - List only licensed types (optional)
-h - Displays command usage information (optional)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks 6000 series

Table of Contents