Removing A Cti Link - Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140

Removing a CTI Link

Console Display/Instructions
The following screen appears.
If you choose
the screen shown in Step 4.
If you choose
to the screen shown in Step 4.
Removing a CTI Link
The following two procedures are used for CTI link removal:
Permanent Removal. When you want to permanently remove a CTI link
from the MERLIN LEGEND Communications System.
Link Shutdown. When you want to temporarily idle a CTI link before
working on it.
Permanent Removal
For a permanent CTI link removal, perform the following steps:
(optional) Suspend MERLIN LEGEND alarming for the CTI link.
Refer to the System Manager's Guide for the steps to suspend the
alarming. If Step 1 is not performed, the system may generate an alarm
about the CTI link before Step 5 is performed.
Upload the PBX Driver (MLPD).
Refer to the System Manager's Guide for instructions.
Unplug the CTI link.
Additional Information
xxxx is dial plan number,
slot/port, or logical ID.
xx is number of seconds (0–90).
default is 25 seconds. If you
enter 1 through 9, the value
is changed to a 10.
from this screen, no data is entered and you return to
from this screen, the data is entered and you return
Issue 1
August 1998
Page 4-125
PC