Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 193

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
800 NI-BRI Module Problems
Console Display/Instructions
The communication paths' result codes are ordered as follows on lines 3
through 6:
1
5
9
13
Communication paths correspond to the following ports on the 800
NI-BRI module:
PATHS
In Release 4.1 and later systems, the following screen appears when the
testing for all 16 communication paths is completed. On a module with
fewer than 16 programmed paths, the screen shows
described in
paths; and
proceeding, record all the result codes on this screen, in the correct
order.
2 3
6 7
10 11
14 15
PORT
Table 4–7 for all successful paths; error codes for all failed
for any path that was not programmed. Before
Additional Information
xx = slot number entered in Step 2
Lines 3 through 6 will contain at
least one error message.
See Table 4–7.
4
8
12
16
PATHS PORT
xx = slot number entered in Step 2
Lines 3 through 6 will contain the
test result codes.
See Table 4–7.
Issue 1
August 1998
Page 4-81
PC
or