Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 297

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Private Network Calling Problems
In Release 6.1 and later systems, the PRI Switch Type Test requests the
system at the other end to verify that the correct PRI switch type is
programmed. This test should be run only by Lucent Technologies
technicians or authorized representatives.
If the call is carried over other systems connected by tandem PRI
facilities, the coordinating system manger must ensure that the settings
are correct, as in this example of MERLIN LEGEND Communications
Systems:
If the switch type settings are correct and problem persists, do one of
the following:
— If the call is a data call, go to Possible Cause 8.
— If the call is not a data call, call the Lucent Technologies Helpline
at 1 800 628-2888; consultation charges may apply.
Console Display/Instructions
At the Slot screen, enter the slot number of the 100D module that is
tied to the other system, and press Enter.
Console Display/Instructions
System A LEGEND-PBX
LEGEND-PBX
System B LEGEND-Ntwk
Additional Information
Dial or type , then select
Additional Information
Issue 1
August 1998
Page 5-51
System C
PC
.
PC