Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 70

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Error Logs
Line 5 indicates the error's last occurrence.
NOTE:
You cannot delete an error log entry from this screen.
Interpreting Error Codes
Table 2–2 explains how to interpret each error from the error logs. For additional
information about how to use the error logs, read this entire chapter and see
''Maintenance Strategy'' on page
Table 2–2. Error Codes
Error
Codes Description
System programming is okay.
System programming is okay.
System programming is okay.
System programming is okay.
System was cold-started while a
restart was in progress.
Faulty software, module, carrier, or
processor sanity timer.
1-21.
Action
No action required; however, if problem
persists, troubleshoot the processor.
No action required; however, if problem
persists, troubleshoot the processor.
If problem persists, troubleshoot the
processor.
If problem persists, troubleshoot the
processor.
If problem persists, troubleshoot the
processor.
Troubleshoot module and or processor.
Issue 1
August 1998
Page 2-6
Continued on next page