Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 79

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Error Logs
Table 2–2. Error Codes (Continued)
Error
Codes Description
Incoming signal does not have valid
framing information.
Service on the link has been lost.
The far end of the network interface
has lost frame synchronization.
Service on the link has been lost.
Service on the link has been lost.
The far end of the network interface is
experiencing loss of multiframe.
Service on the link has been lost.
Average bit error rate exceeds 10E-3.
Service on the link has been lost.
Average bit error rate exceeds 10E-6.
Action
Troubleshoot the T1 trunk. If problem
persists, escalate to your technical
support organization.
Troubleshoot the T1 trunk. If problem
persists, check the CSU and the DS1
configuration (the framing format). If
problem persists, escalate to your
technical support organization.
Troubleshoot the T1 trunk. If problem
persists, escalate to your technical
support organization.
Troubleshoot the T1 trunk. If problem
persists, escalate to your technical
support organization.
Troubleshoot the T1 trunk. If problem
persists, escalate to your technical
support organization.
Troubleshoot the T1 trunk. If problem
persists, escalate to your technical
support organization.
Continued on next page
Issue 1
August 1998
Page 2-15