Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 78

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Error Logs
Table 2–2. Error Codes (Continued)
Error
Codes Description
The system needed to use a trunk in a
pool. Trunks are physically present;
however, non are idle and available
for use, therefore they must be in use
or out of service. See first argument
number on the screen for pool index
(1–11).
The system needed to use a trunk in a
pool. Trunks are physically present,
some may be busy but some are idle.
However, the idle trunks are not in
service. See first argument number on
the screen for pool index (1–11).
See error code 0801
Service on the link has been lost.
All unframed ones signal being
received. The link cannot be used for
communication.
:
:
Action
Check the count and first and last
occurrences. If occurring too frequently,
determine if facilities can be added or
moved to this pool.
Restore if out of service.
Usually no action is required.
Troubleshoot the T1 trunk, channel
service unit (CSU), and the cable
between the CSU and the 100D module.
If problem persists, escalate to your
technical support organization.
Blue alarms are generated by
intermediate equipment, such as a CSU
or DDM 1000/2000. The far end of the
network interface may be out of service.
Troubleshoot the T1 trunk, channel
service unit (CSU), and the cable
between the CSU and the 100D module.
If problem persists, escalate to your
technical support organization.
Continued on next page
Issue 1
August 1998
Page 2-14