Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 289

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Private Network Calling Problems
Reviewing the Non-Local Dial Plan and
Routing
Some of the troubleshooting steps in this chapter require that you review the
extension ranges programmed in the non-local dial plan and/or the routing for
private network calls. Use one of the following three methods to do this:
System Form. Check System Non-Local UDP Administration Form in the
Installation Specification before proceeding. This form summarizes the
extension ranges and routing for the patterns programmed in your
system. For each route, the pool number, programmed digit
manipulation, the Facility Restriction Level (FRL) value are listed, and
the voice/data attribute is listed.
System Report. To see a system print report of existing non-local
extension ranges, patterns, and routes, select the
System Programming menu and then choose
"Network Reports" of Network Reference , includes a sample.
System Programming. To check the current call routing on a system,
consult "UDP Routing" in Chapter 3 of System Programming .
Alternatively, follow one of the summary procedures listed below,
starting from the System Programming menu on your console or PC.
Console Procedure
PC Procedure
view current patterns in use
the number of the pattern that you want to
review Press Inspct to view the
current routing for the pattern
Press
patterns in use
the pattern that you want to
review Press
current routing for the
pattern
August 1998
Page 5-43
option on the
. Appendix B,
Press Inspct to
Dial
to view current
Enter the number of
to view the
Issue 1