Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 57

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Maintenance Strategy
Centralized Voice Messaging
For Release 6.1 and later systems, Centralized Voice Messaging (CVM)
enables usage of a single voice messaging system by other directly connected
systems in a private network. When the Message Waiting lights on the local
system and on all remote MERLIN LEGEND systems that use the local
system's Voice Messaging System may need to be updated. The lights are
updated manually by using the maintenance screens. Follow the procedures in
"Updating the Message Waiting Lights".
For more information about Restart, see "Processor Problems" on page 4–12.
For more information about the Restart procedure, see System Programming .
Updating the Message Waiting Lights
NOTE:
These procedures are used only for Release 6.1 or later systems.
Non-networked systems continually and automatically update in the
event of a cold start.
Consider a manual update of the Message Waiting lights if:
a processor is changed
a VMS is changed on the hub system
a cold start did not successfully refresh
any other instance it is deemed necessary by a qualified technician
You must clear all the Message Waiting lights on the local MERLIN LEGEND
system, and then refresh the Message Waiting lights on extensions that use a
specific VMS, including telephones on a private networked MERLIN LEGEND
system (see the Network Reference for more information). Follow these general
steps below to update these lights.
Clear the Message Waiting lights for systems reporting trouble with
lamp state.
Issue 1
August 1998
Page 1-31