Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 80

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Error Logs
Table 2–2. Error Codes (Continued)
Error
Codes Description
Misframe count reached 18.
Slip count reached 88.
Hardware is not operating properly. If
this is the only 100D (DS1) or 800
CO-BRI module, or if this is the
module designated to have the active
clock, its TDM bus clock generator
was not activated.
Action
Troubleshoot the T1 trunk. If problem
persists, escalate to your technical
support organization.
Troubleshoot the T1 trunk. If problem
persists, escalate to your technical
support organization.
If problem persists, escalate to your
technical support organization.
Usually no action is required.
Troubleshoot the BRI trunk. If problem
persists, contact your technical support
organization.
Usually no action is required. The link
should return to normal once the test is
completed. If problem persists, contact
your technical support organization.
Continued on next page
Issue 1
August 1998
Page 2-16