Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 299

Release 6.1
Hide thumbs Also See for MERLIN LEGEND Release 6.1:
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Private Network Calling Problems
Console Display/Instructions
As the system continues to check for the Switch Type setting, the screen
below appears.
PRI Sw Type Tst Slot xx
Test in Progress
Exit
If the MERLIN LEGEND system at the other end of the PRI tandem trunk
is programmed in the opposite mode, the screen below appears.
PRI Sw Type Test Slot xx
Test Passed
Exit
If the MERLIN LEGEND system at the other end of the PRI tandem trunk
is programmed in the same mode, or does not respond within the
timeout, the screen below appears.
PRI Sw Type Test Slot xx
Test Failed
Exit
If the system at the other end does not respond, the 100D module at the
other end may not be programmed for PRI, or the system at the other
end of the PRI circuit may not be a MERLIN LEGEND Communications
System.
Additional Information
Issue 1
August 1998
Page 5-53
PC

Advertisement

Table of Contents
loading

This manual is also suitable for:

Merlin legend

Table of Contents