Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 68

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Error Logs
Console Display/Instructions
Select an error log option.
The most recent alarm message stays on the System Error Log screen
until it is replaced by another. The screen does not update the most
recent alarm while displayed; to see any updates, you need to exit this
screen and re-enter.
Checking Permanent Errors
Follow Steps 1 through 3 in
.
Line 2 provides a brief description of the error code identified on Line 6. For
more information about an error code, see
Line 3 indicates the slot and port where the error was detected.
Line 5 indicates the error's last occurrence.
NOTE:
Depending on which entry you delete, you might clear an alarm. See
''Alarms'' on page
"''Error Logs'' on page
xx
1-23, for additional information about alarms.
Additional Information
If you select
"Checking the Last 99 Errors," page
If you select
"Checking Permanent Errors," page
If you select
"Checking Transient Errors," page
2-1". In Step 3, select
Press the More button to page
through the permanent errors.
Press the Drop button to delete
an error log entry.
Table 2-6.
Issue 1
August 1998
Page 2-4
PC
, see
2–5.
, see
2–4.
, see
2–5.