Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 203

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
800 NI-BRI Module Problems
Table 4–7. Continued
Result
Code Description
LEGEND BRI error
on that facility
LEGEND
administration error
(Release
and/or CO
4.0 and
provisioning error
earlier)
on that facility
Corrective Action
This result should never appear; if it does,
contact the NSAC.
Check that the facility is programmed with the
DN provided by the CO. If the DN was not
programmed properly, correct it and rerun the
test. If the error persists, perform the
appropriate set of tests (voice only, data only,
or voice and data) and record the results
before contacting the LEC:
Outgoing Voice Call Test
Incoming Voice Call Test
and/or
Outgoing Data Call Test
Incoming Data Call Test
The possible causes of this error are:
Incorrect DN. Error identified at Incoming
Voice/Data Call Test, Step 2. Incoming calls
fail.
Any of the causes listed for
Issue 1
August 1998
Page 4-91
(page 4-94)
(page 4-95)
(page 4-96)
(page 4-97)
and
Continued on next page