MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Error Logs
Table 2–2. Error Codes (Continued)
Error
Codes
Description
Module not in normal operation mode.
Reported in background module
check.
Only applies to modules that have
extension jacks.
This error is reported when modules
are not present.
This error occurs when a sanity test
gets invalid responses. Applies only to
modules that have extension jacks.
Rarely occurs.
Software could not process an event
detection because the slot number
was invalid.
Reported during cold start or
background check.
Reported during cold start.
A module error or processor error
resulted while running test.
Action
Reset the board . If problem persists,
troubleshoot the module.
Reset the board . If problem persists,
troubleshoot the module.
No action required. Delete this entry from
the transient log.
Reset the board . If problem persists,
troubleshoot the module.
No action required; however, if problem
persists, restart the system.
Reset the board . If problem persists,
troubleshoot the module.
Reset the board . If problem persists,
troubleshoot the module.
Reset the board. If problem persists,
troubleshoot the module.
Continued on next page
Issue 1
August 1998
Page 2-20