Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 395

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Restore
The memory card is either not inserted or inserted incorrectly. The restore is
aborted. Reinsert the card and repeat the restore procedure. This screen may
also appear if the wrong type of memory card is inserted and a restore is
requested within one minute of insertion. Verify that the card is a translation
memory card.
Card Removed after Confirmation
The memory card was removed from the processor slot while the restore was in
progress. The restore is aborted; the system performs a System Erase (frigid
start). Reinsert the memory card and repeat the restore procedure.
Wrong System Programming Port
The system programming port is not set to the same system programming port
as that set in the backup file. The restore is aborted. Use the Inspect feature to
view the port of the file on the card. Change the system programming port to
match the port shown on the card (see "System Programming Position
Assignment" in System Programming or System Programming Summary ) and
repeat the restore procedure.
O
YYYY
n = filename selected
xxxx = system programming
port extension
Issue 1
August 1998
Page D-23