Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 82

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Error Logs
Table 2–2. Error Codes (Continued)
Error
Codes Description
A mismatch in the protocol being
supplied versus the protocol
expected by MERLIN LEGEND.
Communication problems between
processor and modules.
Unrecognized message from module
to processor.
Action
Usually no action is required. The link
should return to normal once the test is
completed. If problem persists, contact
your technical support organization.
Troubleshoot the PRI trunk and report to
service provider; otherwise, no action
required. If problem persists, contact your
technical support organization.
Troubleshoot the PRI trunk and report to
service provider; otherwise, no action
required. If problem persists, contact your
technical support organization.
Troubleshoot the PRI trunk and report to
service provider; otherwise, no action
required. If problem persists, contact your
technical support organization.
Troubleshoot the PRI trunk and report to
service provider; otherwise, no action
required. If problem persists, contact your
technical support organization.
Inform the service provider to change the
administration for this circuit.
After the service provider restarts the
circuit, verify that all alarms for this slot
are cleared.
Test the trunk with a single-line
telephone. If the problem is not in the
trunk, replace the module with one that is
known to be working. If the problem is
gone when using the known good
module, replace the module and restart.
Continued on next page
Issue 1
August 1998
Page 2-18