Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 425
Release 6.1
Hide thumbs
Also See for MERLIN LEGEND Release 6.1:
- Feature reference (1021 pages) ,
- System programming manual (1010 pages) ,
- System planning manual (588 pages)
Table of Contents
Advertisement
MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Northern Telecom DMS-100 Switch Translations
SUBGRP < enter subgrp value >
NCOS < enter ncos value >
SNPA < enter NXX value >
KEY <1>
RINGING <Y>
LATANAME < enter value >
LTG < enter value >
LEN_OR_LTID < enter assigned value >
DMS100 normally delivers the Calling Party Number and the Redirecting
Number, if available.
Attach LTIDs to LEN using SLT command:
SONUMBER <<cr> or $>
LTID < enter value >
FUNCTION <ATT>
LEN < enter LEN to which LTID will be attached >
Multiline Hunt Group Feature Translations
The sample screens shown below illustrate the translations for alternate voice
and data hunting on three DSLs and six DNs forming a circular hunt group. This
hunting is provided via the Multiline Hunt Group feature.
The screens shown in this section are examples. DNs shown on these screens
should be replaced with applicable data.
Issue 1
August 1998
Page F-23
Advertisement
Chapters
Table of Contents
Troubleshooting
