Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 89

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Error Logs
Table 2–2. Error Codes (Continued)
Error
Codes Description
Service on the link has been lost.
Service on the link has been lost.
Service on the link has been lost.
Service on the link has been lost.
Service on the link is uninitialized.
Service on the line may be affected.
Action
Check the programmed SPID for
correctness. If it is incorrect, modify the
programming; otherwise, contact the
central office to correct the problem.
Check that the line is securely connected
to the port and that the LEDs on the board
show proper operation. If the card
appears to be working properly, make
sure the CO has activated the line.
The private network is not responding to
the MERLIN LEGEND messages.
Contact the central office to correct the
problem.
The private network is not responding to
the MERLIN LEGEND messages.
Contact the central office to correct the
problem.
The link is in the process of initializing. If
this error remains logged for more than a
half hour, try re-plugging the DSL. If the
problem persists, contact the central
office to correct the problem.
The private network has indicated that a
protocol error has occurred. Verify the line
provisioning by running the NI-BRI
Provisioning Test or through other means.
If the provisioning is correct, contact your
technical support organization.
Continued on next page
Issue 1
August 1998
Page 2-25