Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 202

Release 6.1
Hide thumbs Also See for MERLIN LEGEND Release 6.1:
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
800 NI-BRI Module Problems
Table 4–7. Continued
Result
Code
Description
No voice or data
(Release
hunting, or
4.1 and
Incorrect voice and
later)
data MLHG DN if
MLHG DN is
present, or
Voice and data
hunting was
observed with no
MLHG DN
BRI facility that is
(Release
part of an MLHG is
4.1 and
provisioned with
later)
functioning voice
and data
capabilities
BRI facility that is
(Release
not part of an
4.1 and
MLHG is
later. See
provisioned with
for
functioning voice
Release
and data
4.0 and
capabilities
earlier)
No or incorrect
(Release
SPID administration
4.1 and
later)
Corrective Action
The facility is correctly programmed and
established with layers 1, 2, and 3 with
functioning voice and data capabilities.
Combination of the causes of
No action is required if the MLH voice and
data functionalities are expected. If MLH is
not expected, verify that the MLHG DN is
present and, if so, remove it and rerun the
test.
No action is required if non-MLH voice and
data functions are expected. If MLH is
expected, verify that the MLHG DN is not
present and, if so, administer it and rerun the
test.
Check that the facility is programmed with the
SPID provided by the LEC and rerun the test.
If the error persists, contact the LEC.
Issue 1
August 1998
Page 4-90
and
Continued on next page
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Merlin legend

Table of Contents